Bag Making Machine T-shirt Bag Making Machine Sealing and Cutting Machine Perforating Machine Folding Machine Rotogravure Printing Machine Air Bubble Bag Making Machine Inflation Machine Inflation Machine   Select Product T-shirt Bag Making Machine --- High-Speed T-shirt Bag Making Machine --- Fully Automatic Multi-line T-shirt Bag Making Machine With Servo Motor Control --- T-shirt Bag Punch Machine Sealing and Cutting Machine --- Automatic Sealing and Cutting Machine For Special Type Bags --- Automatic Sealing and Cutting Machine For Flat Type Bag --- Automatic Sandwich Folding Machine --- Piece Cutting MachineWith Servo Motor Control --- Automatic Sealing and Cutting Machine For Thin and Thick Bag With Servo Motor Control Perforating Machine --- Automatic High-Speed Bottom Sealing & Perforating Bag Making Machine Folding Machine --- Gusset Bag Making Machine --- Fully Automatic High-Speed Folding Machine with Servo Motor Driven Rotogravure Printing Machine --- Rotogravure in- line Printing Machine with HDPE/LDPE Blown Film Equipment --- Fully Automatic High-Speed Multi-color Rotogravure Printing Machine Air Bubble Bag Making Machine ---Air Bubble Envelope Making Machine Inflation Machine --- High speed inflation machine for HDPE --- High speed inflation machine for HDPE_LDPE_ LLDPE --- Twin Die high speed inflation machine for HDPE --- Two color high speed inflation machine for HDPE --- Two-layer high speed inflation machine for HDPE Corona Treating System ---Corona Treating System Static Eliminator ---Static Bar Two-Layer High Speed Inflation Machine for HDPE Optional Equipment Air Compressor. Corona Treator. Auto Loader. Rotary Die Device. Embossing Roller. Air Shaft. In-Line Printing Machine. Specifications Model JYIM 45+45 JYIM 50+50 JYIM 55+55 Material application HDPE Film Layflat width (Max.) 50~500 mm 200~750 mm 500~1200 mm Film Thickness 0.01~0.03mm 0.01~0.03mm 0.01~0.03mm Extrusion capacity 20~60 kg/hr 25~80 kg/hr 30~120 kg/hr Extruder Screw diameter & L/D 45mm,L/D=26 50mm,L/D=26 55mm,L/D=26 Screw speed 20~120 rpm 20~120 rpm 20~120 rpm Drive motor 15 HP VSx2 25 HP VSx2 30 HP VSx2 Heater Capacity 24 kw 28 kw 28 kw Screw material SCM-4 with high frequency treatment & Hard chrome plating Cylinder material SCM-4 with harden & Nitride treatment Gear material S-45C with frequency treatment Auto thermo controller 10 sets 10 sets 10 sets Extrusion die (diameter) 80~100 mm 90~100 mm 100~120 mm Control Panel Type Separate Operation completed with VS motor with speed control regulator, ammeter, magnetic contactor, etc Take-up unit Model Moving Upward & Downward Type Drive motor 1 HP 1 HP 2 HP Height of tower 4500mm 4500mm 5500mm Width of roller 900mm 1000mm 1300mm Take-up speed (Max.) 100 m/min. 100 m/min. 80 m/min. Drive motor of elevator 1/2 HP 1/2 HP 1/2 HP Max. distance of elevating 650 mm 650 mm 650 mm Air blower 5 HP 5 HP 5 HP Air cooling ring 1 set 1 set 1 set Steady plate 1 set 1 set 1 set Winder Type Surface friction type Drive motor (torque motor) 1 HP-cm torque motor Max. dia. Of wind-up roll 500 mm 800 mm 800 mm Effective film width 800 mm 900 mm 1200mm Wind-up speed (Max.) 120 m/min 120 m/min 100 m/min Dimension Weight of machine 2600 kg 3200 kg 3800 kg Dimension (LxWxH)(m) 4.5x2.8x4.5 4.8x3.1x4.5 5.2x4.0x5.5 Measurement (Approx.) 20 cu. m 20 cu. m 20 cu. m * The above specifications subject to change without prior notice. Alternative design of combined application for HDPE/LDPE/LLDPE is subject to negotiation. Head Office: 9F, No.58, Juang-Jing Rd., Banchiau City, Taipei, Taiwan 220, R.O.C Tel: 886-2-82510121 Fax: 886-2-82573101 http://www.gtpt.com Factory: No. 270-20, Sec.2, Shituen Rd., Taichung City, Taiwan 407, ROC Tel: 886-4-24512988 Fax: 886-4-24517005 E-mail:norman@gtpt. com